Location
 > Home > News > Industry Trends

The changing times: from "meticulous craftsmanship" to "intelligent craftsmanship"

Publisher:佰铭钟 Release time:2026-06-16 16:29:57 Views:
Publisher:佰铭钟   Views:
Release time:2026-06-16 16:29:57
一. Introduction: A Pillar of the Nation Within a Square Inch

In an aero-engine precision machining workshop, the hands of fitter Chen Bin are a thinking “living ruler.” For sixteen years, these hands have repeatedly refined precision parts for aero-engines within a square inch, dedicating youthful passion and sense of responsibility to day-after-day work. In the field of military manufacturing, post-90s fitter Liu Xi has long strictly controlled machining precision to 1 micron—equivalent to one-ninetieth of the diameter of a human hair. On a scale almost indistinguishable to the naked eye, he guards the quality bottom line of a pillar of the nation with muscle memory and intuition formed through countless practice sessions.

Fitter, the oldest and most basic mechanical machining trade, is standing at an unprecedented historical juncture. From manual filing to smart production lines, from “palm perception” to “data intelligence,” the fitter machining industry is undergoing a profound and drastic transformation. This transformation concerns not only the rise and fall of a trade, but also reflects the grand narrative of China’s manufacturing industry moving from “manufacturing” to “intelligent manufacturing.”

二. Within Millimeters: The Ultimate Pursuit of Fitter Craft

The essence of fitter machining is to carve precision into metal. Whether filing, sawing, drilling, reaming, or assembly, debugging, and maintenance, the core capability of a fitter always revolves around the word “precision.”

In the aviation industry, Shenfei fitter Hua Chengxiang used 5 minutes to file 50 marks onto a square No. 45 steel block with a file, with an error not exceeding 0.005 mm—about one-fifteenth of a hair. This composure was not innate. When he first entered the factory in 2014, he ran at 6 a.m. every morning; at noon, while others rested, he wolfed down his meal in 5 minutes and used all the remaining time to “practice with a stopwatch”; after getting off work at 8 p.m., he continued practicing with a file until one or two in the morning, sleeping only four or five hours a day. Three years later, after rounds of selection, he finally knocked on the door of national master craftsman Fang Wenmo.

In the field of engine manufacturing, “national master craftsman” Chi Zhaoju has rooted himself in the frontline of mold and equipment manufacturing for more than 30 years, growing from an ordinary apprentice into a chief technician. He controls filing precision between 0.01 and 0.005 mm, with an error less than one-tenth of a hair. Over 30 years, he has personally built more than 5,200 sets of precision molds, covering the full product range from light engines to large marine diesel engines.

In the military field, fitter Liu Xi’s workbench is always neat and orderly, with tools placed precisely and orderly, and he resolutely eliminates vague expressions such as “probably,” “possibly,” and “about” for all machining processes and debugging data. Every grinding, every set of data, and every debugging effort is striving to be precise, controllable, and evidence-based.

The stories of these fitter craftsmen reveal a simple truth: in high-end manufacturing, machines cannot completely replace human judgment and feel. As a chief technician of mold fitters with nearly 40 years in the trade said, the diameter of a hair is about 0.07 mm; without instruments, one can detect a subtle change of 0.01 mm by touch with fingers. This “fingertip precision” is muscle memory honed over decades as if one day, and it is “human” wisdom that machines find difficult to replicate.

三. The Intelligent Wave: The Question of the Times Encountered by Traditional Fitters

However, the times will not stop for anyone’s superb skills.

“The times are developing too fast, and the industry’s degree of digitalization and intelligence is constantly increasing,” a chief technician of mold fitters lamented at the 2026 national two sessions. In the modern production workshop where he works, the production line needs only 12 seconds to switch production among 4 vehicle models, more than 430 robots are busy 24 hours a day, and the automation rate reaches 98%. “In terms of efficiency, we certainly cannot beat machines. The old way of competing on feel no longer works.”

This impact is real and visceral.

The story of post-95 fitter Yang Zhunzheng is quite representative. He once “hand-fabricated” parts to the ultimate precision of 0.01 mm, and relying on his unique skills became the top pillar of the enterprise and a national-level skilled master. However, around 2019, the factory began a “major reshuffle”—automated production lines replaced the veteran masters. Yang Zhunzheng suddenly found that his unique skill “seemed no longer to work.” When the machine broke down, English code popped up on the screen, and he could not understand it; he circled the machine, sweating anxiously, but just could not “get his hands in.”

At that moment, he felt that his most familiar file had suddenly become “blunt.”

This was the real panic of many skilled workers at the time: Am I about to be eliminated? Is all my ability useless now?

Automation, digitalization, intelligence—these words are no longer distant concepts, but facts happening in workshops every day. In the torrent of manufacturing’s leap toward intelligent manufacturing, the traditional trade of fitter is standing at a crossroads.

四. Rebirth from the Cocoon: The Capability Leap from “Feel” to “Data”

Facing the wave of industrial transformation, a single skill can no longer meet development needs. The fitter profession is undergoing a profound “capability reconstruction”—the skill core is upgrading from “palm perception” to “data intelligence.”

Yang Zhunzheng chose to start from zero and break through across boundaries. This young master who was already a master craftsman began to learn like a primary school student—by day he rooted himself in the workshop watching the production line and practicing hands-on operations; by night he pored over thick robot manuals, forced his way through foreign equipment documents with a dictionary, and struggled with robot programming. From mechanical principles to electronic control logic, from file grinding to code debugging, he bridged the “digital divide” step by step. For two full years, he hardly let himself rest, and forcefully turned from a “programming novice” into a technical expert, smoothly obtaining the technician certificate for intelligent equipment operation and maintenance worker.

Now, he can not only repair traditional machines, but also “treat” smart production lines—he can use “feel” to judge mechanical problems and use “mental power” to troubleshoot program faults. He has changed from a “file master” into a “general practitioner” who can handle an entire smart production line. He led his team to transform an overseas-model production line in only 7 days, setting the company’s fastest record for overseas model production launch. He led the team to pioneer the “combined laser cutting + hydraulic punching process” and build a standardized robot debugging system, saving the enterprise more than one million yuan every year.

Chi Zhaoju also walked the cross-boundary path from “manual grinding” to “digital intelligent manufacturing.” When his enterprise took the lead in entering the 3D printing field, he proactively shouldered the key research task and led the team to repeatedly debug equipment parameters in the workshop by day and consult literature and deduce process plans at night. They innovatively formed the “3D printing + mold-free precision casting forming” additive-subtractive composite rapid manufacturing technology, which subverted the traditional production process and greatly shortened the new product development cycle. The scientific research results supported by this technology won the Special Prize of the China Machinery Industry Science and Technology Award and the Second Prize of the National Technological Invention Award.

These cases reveal a clear trend: future fitters must not only be dexterous, but also creative; not only know how to operate, but also understand programming; not only rely on feel, but also rely on data. Today’s skilled craftsmen not only have unique skills in their hands, but also must learn to innovate and possess the ability to use interdisciplinary knowledge—understanding AI drawing, data analysis, and programming, and also being able to command robots and repair automated equipment.

As a deputy to the National People’s Congress said, in the era of artificial intelligence, factory systems are becoming more and more complex and tools more and more advanced, and technicians must learn a large amount of new knowledge. The ability of craftsmen must match the tools of production and productive forces of their times.

五. The Talent Dilemma: The Shortage of High-Skilled Fitters and the Breakthrough

While the industry is accelerating its transformation, talent supply is facing severe challenges.

According to data from the Ministry of Human Resources and Social Security, China’s total skilled talent has exceeded 200 million, including more than 60 million high-skilled talents, but frontline technicians such as fitters and welders are generally in short supply. Relevant calculations show that high-level technicians account for only about 5% of industrial workers in China, with a gap of nearly 10 million.

After research, a chief technician of mold fitters found a core crux: vocational college program offerings lag behind industry needs, and school-enterprise cooperation lacks long-term impetus. At the same time, many small and medium-sized enterprises lack promotion channels and incentive policies for skilled talent and are not qualified to independently evaluate skilled talent. Many frontline technical workers lack motivation to learn skills and lack enthusiasm for training.

Facing this dilemma, all parties—from national to local levels, from enterprises to colleges—are actively exploring solutions.

At the policy level, the Work Plan for Stabilizing Growth in the Machinery Industry (2025–2026) issued by the Ministry of Industry and Information Technology and five other departments clearly proposes improving the operational quality and development efficiency of the machinery industry and striving for an average annual revenue growth rate of about 3.5%. The State Council Leading Group on Employment Promotion and Labor Protection deployed a large-scale vocational skills upgrading training action, focusing on high-end, precision and advanced industries and urgently needed sectors, and carrying out subsidized training. Some localities have also established an integrated training and recruitment system for shortage occupations, implementing methods such as “signing upon training” for positions such as fitters and CNC operators.

At the enterprise level, some large manufacturing enterprises have built a training chain of “chief craftsman (leading topics) → young craftsman (attacking projects) → seed craftsman (practicing basics),” implanting craftsman genes upon entry. Through the deep integration of industrial robots, smart sensors, and craftsman skills, they continue to provide technical support and innovation momentum for high-end manufacturing.

At the level of skill inheritance, national and provincial master craftsman studios are becoming important platforms for craft inheritance. A fitter master who has rooted himself in the production frontline for nearly 41 years grew from an ordinary apprentice into a mainstay in the fitter field, and his Tool Fitter Master Craftsman Studio was approved as a national-level master craftsman studio. These studios not only undertake technical research tasks, but also shoulder the important mission of craft inheritance and talent cultivation.

六. Skills Competitions: An Arena for Tempering Craftsmanship

Vocational skills competitions are becoming an important platform for testing and improving fitter skill levels.

In 2025, the National Industry Vocational Skills Competition—the preliminary contest of the 9th Vocational Skills Competition of AVIC, Fitter (Machining Direction)—was successfully held. In the same year, the fitter contest of the Guangzhou “Nansha Craftsman Cup” Vocational Skills Competition attracted 62 technical contestants from 15 enterprises to compete on the same stage, engaging in a contest of millimeter-level precision in the field of metal structure assembly. The competition set up a two-stage assessment of “theory + practical operation.” The practical part required contestants to complete blank processing and assembly projects within 300 minutes, covering core fitter skills such as filing, sawing, hole system processing, thread processing, and assembly technology. The clearances of all workpiece mating surfaces had to be controlled within 0.03 mm.

At the fixture fitter venue of the 5th Vocational Skills Competition of AECC, fitter Chen Bin trained hard for three months before competing. Facing problems such as strict part machining tolerance requirements and difficult-to-guarantee hole position accuracy, he repaired with a file and repaired with a milling cutter, all in order to find the optimal solution of “precision + efficiency.” When an emergency occurred during the competition and deviation appeared in workpiece processing, he flexibly used the “material borrowing” processing method, repeatedly calculating and correcting within the allowed allowance, and finally came from behind to win the championship.

These competitions not only selected top skilled talent, but also promoted the exchange and improvement of fitter technology, creating a good atmosphere of valuing skills and respecting craftsmen throughout the industry.

七. The Future Is Already Here: Three Trends in the Fitter Industry

Looking to the future, the fitter machining industry is showing three clear development trends:

First, human-machine collaboration will become the norm. As a chief technician of mold fitters said, the future will be more about human-machine collaboration—robots do physical labor, and humans are responsible for supervision and optimizing creativity. Fitters will no longer be purely physical laborers, but the “commanders” and “general practitioners” of smart production lines.

Second, the trend of skill compounding is obvious. Facing industrial transformation, the fitter profession is undergoing the “three changes of breaking the cocoon”—the work domain is expanding from “single diagnosis” to “systemic diagnosis and treatment,” requiring new-era technical workers who understand knowledge, skills, and innovation. A single skill can no longer meet development needs, and compound skilled talent will become the backbone of the industry.

Third, the craftsman spirit and the innovation spirit will be deeply integrated. The core of the craftsman spirit is dedication and innovation. Craftsmen must continuously learn and explore new technologies and new methods and master more unique skills. The true craftsman spirit is not only striving for perfection, but also always having innovation flowing in its blood.

八. Conclusion

From the filing precision of 0.005 mm to code debugging on smart production lines; from manually grinding more than 5,200 sets of precision molds to the process innovation of “3D printing + mold-free precision casting forming”—the fitter machining industry is writing a magnificent chapter about inheritance and transformation.

This ancient trade has not died out in the wave of intelligence, but has transformed in pain and been reborn in challenges. Future fitters will be “new craftsmen” with both dexterity and creativity, “digital-intelligent people” proficient in both feel and data, and “creators” blending traditional craft with cutting-edge technology.

As a young fitter said: “People may deceive you, but your work will not deceive you. If it is out of tolerance, it is out of tolerance.” This reverence for precision and persistence in quality are the eternal spiritual core of the fitter industry. On top of this core, continuously injecting new energy of digitalization and intelligence, the fitter machining industry will surely continue to play an indispensable key role in the journey of high-quality development of manufacturing.

Likes:

Tel
15921227578 Liu Jinlin
Landline:021-69176937
Email
jinlinliu@bmzpmw.com
Headquarters Base
No. 58, Lane 355, Shengxin South Road, Nanxiang Town, Jiading District, Shanghai
Taicang Base
About 60 meters northeast of the intersection of Taicang City Pai Xin Chang Line and Xingang Road in Suzhou City
Customer Service WeChat
Copy successful
Contact
We are right beside you
Add WeChat and let us know your needs
Tel
15921227578
Top
Copy successful

WeChat ID: 400-000-8888

Add WeChat friends to get free
solutions and quotes

OK