一. Introduction
Bench work is an indispensable and important trade in mechanical manufacturing and repair work. Its operations cover multiple processes such as marking-off, sawing, filing, drilling, tapping, die threading, scraping, and lapping, and it features flexible machining, convenient operation, and the ability to machine complex-shaped and high-precision parts. However, because bench work operations are mainly completed manually and are affected by many factors such as tools, operating methods, environment, and operator skill level, various problems are likely to occur during actual operation, resulting in reduced part machining quality, and even scrapping of parts, increasing production costs and production cycles.
In actual bench work operations, common problems are mainly reflected in two aspects: first, slow processing speed, manifested as workpieces not being completed on time within the specified time, or labor intensity being greater than that of others; second, quality problems, mainly manifested in poor dimensional accuracy and poor fit clearance, specifically including problems in dimensions and geometric tolerances (flatness, straightness, perpendicularity, surface roughness, symmetry, etc.), problems in thread machining, problems in hole machining, and unreasonable process arrangements.
Starting from the main operations of bench work machining, this paper systematically analyzes the manifestations, causes, and countermeasures of various common problems, in order to provide reference for bench work operations.
二. Common Problems in the Marking-off Process
Marking-off is the first operation in bench work. It is the process of using marking-off tools to draw machining boundary lines on blanks or semi-finished products according to the dimensions and requirements of the drawing. Although marking-off appears simple, it is crucial to the subsequent machining of the workpiece.
Common problems in the marking-off process mainly include the following categories:
Marking-off deviation. Marking-off deviation refers to errors between the drawn lines and the dimensions, shapes, or positions required by the drawing. This may be caused by insufficient accuracy of marking-off tools or incorrect marking-off methods used by operators. For example, using a worn scriber will cause uneven line thickness and inaccurate dimensions; selecting an inappropriate marking-off datum will make it impossible to ensure the positional accuracy between machining surfaces. In addition, when marking off, if the line of sight is not perpendicular to the height gauge and the operator looks upward, the actual marked dimension will be too large, bringing trouble to subsequent machining.
Unclear marking lines. Unclear marking lines are caused by a too blunt scriber, an unclean marking-off surface, or uneven coloring, etc. This will bring difficulties to subsequent processes and easily lead to machining errors.
Excessive cumulative error. Because the drawn lines always have a certain width, and errors are unavoidable when using marking-off tools and measuring and adjusting dimensions, marking-off cannot be absolutely accurate. Generally, the accuracy of marking-off should be controlled within the range of 0.25 to 0.5 mm. If errors from multiple links are superimposed, the cumulative error value will often be very large, affecting the machining accuracy of subsequent workpieces.
To prevent problems in the marking-off process, first, the accuracy and quality of marking-off tools must be ensured, marking-off tools such as scribers, height gauges, and vernier calipers should be regularly checked and calibrated, and severely worn tools should be replaced in time. Second, the marking-off datum should be reasonably selected, and the design datum or process datum should be selected as the marking-off datum according to the machining requirements and shape characteristics of the part. At the same time, before marking off, the blank should be carefully inspected to remove burrs, oil stains, oxide scale, etc. from the surface. In addition, operators should proficiently master correct marking-off methods, apply force evenly when marking off, and make lines thin and clear.
三. Common Problems in the Sawing Process
Sawing is the operation of using a saw to cut off or slot materials or workpieces, and it is widely used in bench work operations. Common problems in the sawing process mainly include saw blade breakage, skewed saw kerf, and rough sawn surfaces.
Saw blade breakage is the most common problem in the sawing process. The main causes include improper installation of the saw blade, incorrect starting sawing method, excessive or suddenly increased sawing pressure, and insecure workpiece clamping. Specifically, if the saw blade is installed too loosely or too tightly, it will affect the stability of sawing; if the angle is too large or the force is too strong when starting the saw cut, the saw blade is likely to chip or break; during sawing, if the sawing pressure is too high or a hard spot is suddenly encountered without timely adjustment of the force, the saw blade may also break. In addition, improper selection of saw blade material, or failure to add lubricant in time when sawing materials with high hardness or high viscosity, can also easily cause saw blade breakage.
Skewed saw kerf is caused by the saw blade not being perpendicular to the workpiece, the saw blade swinging during sawing, or the workpiece being clamped askew. If the saw cut starts too far from the marked line during sawing, or if the operator's line of sight does not observe whether the saw blade coincides with the vertical line during sawing, the allowance after sawing will also be too large.
A rough sawn surface may be caused by severe saw blade wear, excessive sawing speed or excessive feed, insufficient cooling and lubrication, etc.
To prevent sawing problems, first, the saw blade should be installed correctly, ensuring that the teeth point forward, and the tightness of the saw blade should be appropriate. Generally, it is suitable if the saw blade feels elastic when gently plucked by hand. Second, a correct starting sawing method should be mastered; the angle when starting the saw cut should be small, generally not exceeding 15°, and the force should be even. In addition, the workpiece should be firmly clamped in the correct position, and the pressure should be well controlled during sawing to avoid excessive force.
四. Common Problems in the Filing Process
Filing is one of the most basic and important operating methods in bench work, and it is characterized by high difficulty and difficulty in mastery. During filing, the machined surface often shows out-of-tolerance phenomena, mainly in the following aspects.
Uneven flat surface filing. During the filing of thin sheet surfaces, the filed surface may form conditions such as convexity in the middle of the plane, diagonal twist or collapsed corners, and transverse convexity or concavity of the plane. The causes of uneven filing are many: inappropriate selection of files for filing, resulting in long processing time on one side; improper selection of file tooth patterns; filings embedded between file teeth and not removed in time; improper selection of rough and fine filing allowances; poor filing skills, weak basic skills, not daring to remove material, and too many measurements, etc.
Dimensional out-of-tolerance. Dimensional out-of-tolerance is another common problem in filing, mainly manifested as workpiece dimensions exceeding the tolerance range. Causes of dimensional out-of-tolerance include inaccurate marking-off, inaccurate measurement during filing, and improper control of filing amount, etc.
Surface roughness out-of-tolerance. Surface roughness not meeting requirements may be caused by improper selection of file tooth patterns, filings embedded between file teeth and not removed in time, improper selection of rough and fine filing allowances, etc. In addition, failure to use a safe-edge file when filing right-angle edges will also affect surface quality.
The key to improving filing quality lies in: selecting the appropriate file type and tooth pattern, reasonably allocating rough filing and fine filing operations according to the machining allowance, promptly cleaning filings from the file teeth, mastering correct filing posture and force, and strengthening measurement frequency to ensure dimensional accuracy.
五. Common Problems in the Drilling Process
Hole machining is one of the basic skills of bench work operations and is the most common operation in bench work. The quality problems of the drilling process directly affect subsequent assembly and use.
Hole diameter deviation. Common hole diameter problems during drilling include hole diameter too large or too small. The main reason for an oversized hole diameter is that the two main cutting edges of the drill bit are unequal in length, resulting in uneven cutting. In addition, unreasonable drill bit grinding angles and improper cutting parameters can also cause hole diameter deviation.
Hole position deviation. Hole position deviation is one of the most common quality problems in drilling. Causes of hole position deviation include: inaccurate and unclear marking-off; inaccurate center punching; long chisel edge and poor centering performance of the drill bit; and deflection of the drill bit during machining. The dimensional accuracy and positional accuracy of holes are also affected by factors such as drilling machine accuracy, marking-off accuracy, center punch accuracy, twist drill grinding quality, application of tooling and fixtures, and selection of drilling parameters.
Drill bit breakage. Especially in small hole machining, drill bit breakage or deviation is a frequently occurring problem. If the drill bit diameter is too small and its strength is weak, it is easy to break during machining; improper selection of drilling parameters, insufficient cooling and lubrication, and poor chip removal are also important causes of drill bit breakage.
Tilted hole axis. Tilt of the hole axis will affect subsequent assembly and use. This is usually caused by the drill bit not being perpendicular to the workpiece surface, insecure workpiece clamping, and drill bit swinging during drilling.
Methods for improving drilling quality include: improving marking-off accuracy and drilling positioning accuracy; increasing clamping rigidity; improving cutting conditions; improving drill bit grinding accuracy; and adopting precision positioning processes. In drilling operations, a small hole should first be drilled for positioning, and then the hole should be enlarged to the required size, avoiding one-step completion.
六. Common Problems in the Reaming Process
Reaming is a method of removing a small amount of metal layer from the wall of a workpiece hole with a reamer to improve the dimensional accuracy of the hole and refine the surface roughness. Common problems in the reaming process include poor surface roughness, hole diameter enlargement, hole diameter shrinkage, non-straight hole center, and polygonal holes.
Poor surface roughness. This is one of the most common problems in reaming. Excessive reaming speed has the greatest impact on surface roughness; uneven reaming allowance or too large or too small reaming allowance will cause inconsistent hole wall thickness, resulting in uneven cutting force of the tool during machining, thereby making the surface roughness of the hole wall uneven; if no lubricant is used during reaming, dry friction will occur between the flank face of the working part of the reamer and the hole wall, which will also make the surface roughness worse.
Hole diameter enlargement or shrinkage. Improper reaming allowance and excessive feed will affect hole diameter accuracy. Generally, the reaming allowance is 0.1 to 0.25 mm, and for larger-diameter holes, the allowance should not exceed 0.3 mm.
Bell-mouthed hole opening. This is also one of the common quality problems in reaming and is related to factors such as reaming speed, reaming allowance, reaming feed, reamer blade condition, and lubrication.
The key to improving reaming quality lies in: reasonably selecting reaming parameters (speed, feed, allowance), ensuring that the reamer blades are sharp, using appropriate cutting fluid, and performing rough reaming and finish reaming separately.
七. Common Problems in Thread Machining
Thread machining includes tapping (internal threads) and die threading (external threads), and it is a basic technique that bench workers need to master proficiently. Although the thread machining process is not complicated, problems often occur during actual operation due to nonstandard, unreasonable, and irregular operations.
Common problems in tapping. Common problems during tapping include skewed threads, uneven threads, damaged threads, crossed threads, chipped tap teeth, and tap breakage. Tap breakage is the most troublesome problem. Its main causes include: too small pilot hole diameter, poor chip removal causing chip clogging; insufficient drilled depth when tapping blind holes; too high tapping speed; tap not coaxial with the pilot hole; improper selection of tap grinding parameters; and too long use time and excessive wear of the tap. Among them, the tap not being coaxial with the pilot hole is the main cause of tap breakage, and the tap breakage caused by this is more than the sum caused by the aforementioned factors. In addition, during tapping, if the operator applies uneven force with both hands, causing the direction of force to change, the tap is also easily broken.
Common problems in die threading. Common problems during die threading include skewed threads and pitch diameter out-of-tolerance. Skewed threads are usually related to poor guidance during die threading, uneven tool wear, excessive cutting speed, or improper cutting fluid. Pitch diameter out-of-tolerance may be caused by improper selection of the round rod diameter or by still applying feed force after the die has cut in.
The key to improving thread machining quality lies in: correctly selecting the pilot hole diameter or round rod diameter; ensuring that the tap or die is coaxial with the workpiece; controlling cutting speed; promptly removing chips; using appropriate cutting fluid; and regularly inspecting and replacing worn tools.
八. Common Problems in Scraping and Lapping
Scraping and lapping are precision machining methods used in bench work machining to obtain high-precision surfaces.
Common problems in scraping. Scraping is a method used to machine the surfaces of precision parts. Common surface defects include deep pits, tear marks, chatter marks, scratches, and inaccurate surface accuracy. The occurrence of these defects is usually related to factors such as scraper blade grinding quality, scraping force control, scraping speed, and workpiece clamping stability.
Common problems in lapping. Lapping is a method of precision machining the workpiece surface using abrasive particles coated or embedded in a lapping tool. A common problem during lapping is that the workpiece surface is not smooth and clean. One of the main reasons is that the abrasive used is too coarse; coarse abrasive will leave deep marks and affect surface quality. In addition, improper selection of lapping allowance will also affect machining quality—the cutting amount of lapping is very small, and generally the metal layer removed per lapping pass does not exceed 0.002 mm. If the allowance is too large, lapping time will increase and the service life of the lapping tool will be shortened.
The key to improving scraping and lapping quality lies in: selecting appropriate tools and abrasives, controlling the machining allowance well, maintaining operational stability, and paying attention to cooling and lubrication.
九. Problems Related to Equipment and Tools
In addition to the specific operational problems of each process, the condition of equipment and tools is also an important factor affecting bench work machining quality.
Bench vise problems. The bench vise is the most commonly used clamping tool in bench work. Its common problems include insufficient or excessive clamping force, worn jaws, and lead screw sticking. Insufficient clamping force will cause the workpiece to loosen during machining; excessive clamping force will cause clamp marks or deformation on the workpiece surface; impurities on the jaw surface or severe wear will reduce friction and cause insecure clamping.
Cutting tool wear. Severe wear of cutting tools will lead to reduced machining quality. Its causes include poor cutting tool material, improper setting of cutting parameters, and poor cooling and lubrication.
Workpiece positioning problems. Inaccurate workpiece positioning, and workpiece loosening or falling off during machining, will affect machining accuracy.
Measures to prevent equipment and tool problems include: regularly inspecting and maintaining equipment; promptly replacing worn tools and fixtures; correctly using and maintaining tools; and checking whether tools are safe and reliable before operation.
十. Conclusion
Bench work machining is a complex and delicate job. From marking-off to final completion, various problems may occur in each operation. These problems have both technical causes and factors related to operating habits and skill levels. To improve bench work machining quality, it is necessary to start from multiple aspects: first, strengthen basic skills training and proficiently master the operational essentials of each process; second, reasonably select tools and cutting parameters; third, attach importance to measurement and inspection and promptly discover and correct deviations; fourth, do a good job in the maintenance and upkeep of equipment and tools; fifth, optimize process planning and avoid repeated machining and unnecessary operations.
Bench work operations are mainly completed manually and are affected by many factors such as tools, operating methods, environment, and operator skill level. Only by deeply understanding the causes of various problems and mastering correct operating methods and preventive measures can problems be effectively avoided during machining, part machining quality be ensured, and production efficiency be improved.
Likes:

Contact


WeChat ID: 400-000-8888
Add WeChat friends to get free
solutions and quotes