Location
 > Home > News > FAQ

Full analysis of common problems in laser marking: systematic diagnosis and solution from phenomenon to root cause

Publisher:佰铭钟 Release time:2026-06-16 16:42:08 Views:
Publisher:佰铭钟   Views:
Release time:2026-06-16 16:42:08

Laser marking technology, with advantages such as permanent marking, high precision, non-contact processing, and environmentally friendly and pollution-free operation, has been widely used in many industrial fields including electronics, automotive, medical devices, and packaging. However, in actual production, laser marking equipment inevitably experiences various faults and effect defects, directly affecting product quality and production efficiency. From an engineering practice perspective, this article systematically reviews the most common categories of problems in the laser marking process, deeply analyzes their causes, and provides actionable solutions, aiming to provide frontline operators and technical managers with a practical troubleshooting reference.

一. Marking Quality Defect Issues

Marking quality is the most intuitive indicator for evaluating laser marking results and is also the link most prone to problems. Common manifestations include unclear marking, insufficient depth, abnormal color, and non-uniformity.

1. Blurred marking or unclear lines

This is the most common fault phenomenon. Blurred markings not only affect readability but may also lead to serious consequences such as product traceability codes being unscannable and brand logos being distorted.

From cause analysis, blurred marking usually involves three levels. At the software level, improper power parameter settings or excessively high frequency are common causes—if power is too low, energy is insufficient to form clear traces; if frequency is too high, the energy of a single pulse is insufficient. At the hardware level, contamination or damage of optical components is one of the main causes: contamination or damage to any of the beam expander lens, field lens, and galvanometer lens will cause laser spot attenuation and blurred marking. At the cooling system level, if the chiller operates abnormally and causes the laser to overheat, the optical output power will become unstable, which likewise affects marking clarity.

To address this problem, troubleshooting should be carried out step by step in the order of "software—hardware—cooling." First check whether the power and frequency parameters in the software are within a reasonable range; second, clean all optical lenses—use a lint-free optical wiping cloth dipped in anhydrous ethanol to gently wipe the focusing lens, galvanometer lens, and beam expander in the same direction; finally, check whether the cooling water circulation is normal and whether the water temperature is within the set range.

2. Insufficient marking depth

Insufficient depth means the marking is too shallow and is prone to wear failure during subsequent surface treatment or use.

The causes of insufficient depth are relatively complex and may include: the laser output power itself does not meet requirements; inaccurate optical path adjustment causes energy loss; improper position or orientation of the beam expander; contamination on the lens surface; the workpiece surface is not at the focal plane; the output voltage of the laser power supply drops; and marking speed is too fast, resulting in insufficient energy input per unit area. In addition, aging of core components of the laser is also a factor that cannot be ignored—for lamp-pumped lasers, after a krypton lamp has been used for too long, its luminous efficiency decreases, and laser output weakens accordingly.

To solve the problem of insufficient depth, the above links need to be checked one by one. First use a frequency-doubling plate to check whether the optical path is offset and adjust it; clean all optical lenses; confirm that the workpiece surface is at the focus; if the output voltage of the laser power supply drops, replace the power supply; appropriately reduce the marking speed to increase energy accumulation. For judging krypton lamp aging, the standard current method can be used—record the current value when a new krypton lamp performs normal marking as a baseline; when the current must be adjusted to more than 1.25 times the baseline value and normal marking still cannot be achieved, the krypton lamp should be replaced.

3. Abnormal marking color

On different materials, the color expected from laser marking varies—on stainless steel, a deep black high-contrast mark is expected; on anodized aluminum surfaces, a clearly distinguishable gray-black mark is expected, etc. Deviation of color from expectations often means there are problems with process parameters or material condition.

For poor blackening effect on stainless steel, possible causes include: contamination or damage of laser resonator mirrors causing impure output mode; abnormal operation of the Q-switch power supply resulting in insufficient peak energy; power too low or speed too fast causing the oxide layer not to be fully generated; and excessively high surface smoothness of the workpiece causing severe laser reflection and low energy absorption. For anodized aluminum materials, if the marking depth remains only on the surface and fails to break through the oxide layer, the marking effect will appear gray rather than the ideal black.

Adjusting color effects requires systematic optimization of parameter combinations. For metal materials, try adjusting pulse parameters to control the thermal action time; for highly reflective materials, appropriately reduce marking speed or increase the number of passes to improve energy absorption; for oxide-layer materials, ensure that the laser energy is sufficient to penetrate the oxide layer and reach the substrate.

4. Non-uniform marking—part clear, part blurred

When within the marking area one part is clear and another part is blurred, this often points to local problems in the optical system or mechanical system.

The main causes include: optical path deviation or local contamination of reflective mirrors, causing uneven laser beam intensity in different areas; coaxiality deviation between the galvanometer and focusing lens causing local defocusing; improper position of the focusing lens causing the focal plane to be non-parallel to the workpiece surface; uneven temperature distribution of the hot-pressing device (if applicable).

Solving such problems should start with optical path calibration—check and clean all reflective mirrors and lenses to ensure the optical path is clean and unobstructed; adjust the height of the focusing lens, use the "focus test method" to mark the same pattern on the material, and gradually adjust the height until the pattern is clearest; if necessary, recalibrate the coaxiality between the galvanometer and focusing lens.

二. Optical System Issues

The optical system is the "eyes" and "arms" of laser marking, and its condition directly determines marking precision and effect.

1. Graphic distortion—pincushion, barrel deformation, or trapezoidal

When a standard square is printed as a trapezoid or diamond, or the border shows pincushion or barrel deformation, the problem usually lies in the galvanometer scanning system.

It should be clarified that pincushion or barrel distortion is an inherent phenomenon of galvanometer marking, originating from the optical characteristics of the galvanometer scanning method itself. The solution is to perform distortion signal correction. There are two correction approaches: hardware correction changes the analog signal voltage value according to specific rules through a correction card and then transmits it to the galvanometer head; software correction is a correction function built into the marking software, which preprocesses the digital signal before marking. At present, software correction is the mainstream method.

2. Decreased laser power

Power decrease is the most common progressive fault, manifested as markings becoming increasingly shallow under the same parameter settings.

The causes of power decrease can be summarized into the following categories: the service life of the laser is approaching its end (e.g., gas lasers need refilling or replacement); the optical path system is offset; the position or orientation of the beam expander is inaccurate—the incident light is not at the center of the entrance aperture, and the outgoing light is not at the center of the exit aperture; the laser entering the galvanometer deviates from the center; the laser power supply voltage drops; the position of resonator mirrors changes.

During troubleshooting, first confirm whether the power supply voltage is stable, then check whether the optical path is offset and adjust it with a frequency-doubling plate, then check the position of the beam expander, and finally evaluate the aging degree of the laser itself. Fine adjustment of resonator mirrors requires professional personnel, and safety should be noted during operation.

3. No laser output or red light present but no marking

The equipment has red light indication but the laser cannot leave a mark on the material; this situation often confuses operators.

Possible causes include: power set to zero or close to zero in the software; acousto-optic crystal offset or low output energy of the acousto-optic power supply; laser output spot blocked—the spot is incomplete after the beam passes through the galvanometer and field lens; no light output signal (+5V) at pin 8 of the D/A conversion card, causing no output from the laser; safety interlock triggered; extremely low absorption rate of the material for the laser wavelength.

During troubleshooting, first check the software power setting, then check the working status of the acousto-optic system, then check whether there are obstructions in the optical path, and confirm that the safety interlock is in normal state. For material mismatch, consider surface pretreatment (such as spraying marking agent) or changing the laser type.

三. Parameter Setting and Process Optimization Issues

The three core parameters of laser marking—power, speed, and frequency—have complex coupling relationships, and improper parameter settings are the root cause of the vast majority of effect problems.

1. Matching principles of power, speed, and frequency

Power determines the amount of laser energy per unit time. The higher the power, the greater the marking depth and contrast, but too high will cause excessive ablation or melting of the material. Speed determines how fast laser scanning is. The slower the speed, the more energy accumulated per unit area, and the deeper the marking, but too slow will cause overprocessing. Frequency determines the number of laser pulses emitted per second and has a significant impact on surface roughness—high frequency can achieve smoother markings.

The basic logical relationship among the three can be summarized as: power ↑ + speed ↓ + frequency ↓ → depth ↑, but excessive parameter adjustment may damage the material.

2. Parameter adjustment strategies for different materials

Different materials differ greatly in laser absorption rate and thermal response, requiring differentiated parameter configurations.

Metal materials (stainless steel, aluminum, copper, etc.): higher power, medium frequency, and slower speed are suitable. Taking a 20W fiber laser marking on stainless steel as an example, it is recommended to use power 70%–80%, speed 300–500 mm/s, and frequency 20–30 kHz. For thicker metals or metals with low absorption rate, power should be appropriately increased. Note the reflection problem of highly reflective metals (such as copper and aluminum), and the focal length should be appropriately adjusted.

Plastic materials: plastics have low laser absorption rate and high transparency. Low-melting-point plastics (such as PE and PP, melting point 100–160°C) require low power + high speed parameters to reduce thermal action time and prevent melting deformation. High-melting-point plastics (such as PA nylon and PPS, melting point above 200°C) can appropriately increase power to ensure clarity. For PP material, it is recommended to use power 50%–60% and speed 600–800 mm/s to avoid burning the surface.

3. Relationship between filling parameters and clarity

For graphics requiring large-area filling (such as logos and QR codes), filling spacing and filling density directly affect the final effect. The smaller the spacing, the more uniform the marking, but too large a spacing will show obvious scanning line traces. For fine graphics, it is recommended that the filling spacing be ≤0.02 mm. The lower the galvanometer speed (≤500 mm/s), the finer the lines. During optimization, priority should be given to adjusting filling density, and then adjusting speed to balance efficiency.

四. Material Adaptability and Pretreatment Issues

1. Matching of materials and laser types

Different laser types differ significantly in adaptability to different materials. Fiber lasers are suitable for metals and some plastics; CO₂ lasers are suitable for non-metallic materials such as wood, acrylic, and paper; UV lasers are suitable for fine plastics and glass, and their cold processing characteristics can make edges clearer. Using a CO₂ laser to mark metals will result in shallow and blurred markings due to high reflectivity. Therefore, when effect problems occur, the first thing is to confirm whether the laser type used is suitable for the current material.

2. Influence of material surface condition

Oil stains, oxide layers, coatings, or excessively high smoothness on the material surface will all affect laser absorption and marking effect. Before marking, wipe with alcohol to remove oil stains; for severely oxidized metals, grinding or pickling can be performed first; for materials with rough surfaces (such as castings), speed can be appropriately reduced and power increased to deepen the marking and enhance contrast. High-smoothness surfaces such as mirror stainless steel reflect severely, and parameter optimization or surface pretreatment is needed to improve energy absorption.

五. Software and Operating System Issues

1. Abnormal file import and display

Common problems in software operation include: garbled characters, incorrect dimensions, or positional offset after importing graphics; text displayed as garbled characters such as ; graphic deformation, etc.

Garbled character problems usually originate from mismatched file encoding formats—the common conflicting encoding is UTF-8, which needs to be changed to ANSI format. Text garbling may be due to software font incompatibility; replacing the font can solve it. When DXF file import is garbled, try saving the file in R12 format and converting all text to paths. For bitmap import, BMP format is recommended (preferred); before import, use image processing software to convert to grayscale mode and adjust contrast to make pattern edges clearer.

2. Marking position offset

The marking position is inconsistent with the design position; possible causes include: incorrect software coordinate origin setting; loose galvanometer or bracket; workpiece fixture displacement; thermal drift after long-term operation.

Solution: verify the software coordinate origin and reset the workpiece zero point; tighten the galvanometer bracket and check whether the lens is damaged; use reliable fixtures and reference points (such as pins) rather than tape to fix the workpiece; for long-term production, allow the equipment to fully warm up and periodically recheck alignment.

六. Maintenance and Preventive Measures

The root cause of many laser marking problems lies in inadequate daily maintenance. Systematic preventive maintenance is the key to reducing faults and extending equipment life.

1. Daily maintenance of the optical system

Optical lenses (focusing lens, galvanometer lens, beam expander) are the most fragile components in a laser marking machine and are also the factors most likely to affect the effect. It is recommended to wipe the protective glass of the F-θ lens daily with a dust-free cloth dipped in a small amount of alcohol in the same direction. Great care must be taken when cleaning lenses; touching the lens surface with hands is strictly prohibited to prevent fingerprint contamination. If the lens is scratched or damaged, it should be replaced in time.

2. Management of the cooling system

The cooling system is crucial to the stable operation of the laser. It is strictly prohibited to start the laser power supply when there is no water or the water circulation is abnormal. Before work, the chiller must be turned on and wait until the water temperature is consistent with the set temperature; the temperature difference should not exceed 0.5°C. The internal circulating cooling water should be replaced every 3–6 months depending on water quality. In winter or when the equipment is not used for a long time, the internal cooling water should be drained completely to prevent damage from freezing. The water temperature should be controlled below 35°C, and purified water or deionized water is recommended.

3. Working environment and operating specifications

The equipment should be placed in a well-ventilated, clean, and bright environment, and kept at least 0.6 m away from walls and other obstacles to ensure ventilation. The working temperature should preferably be maintained at 18–28°C. Note the power-on/off sequence—when shutting down, first adjust the current to about 5 A. When the equipment is not working, the work chamber door should be closed properly to prevent dust from entering. When abnormal phenomena occur, first turn off the galvanometer switch and key switch before checking. The processing site should be equipped with a fume extraction duct to exhaust smoke and waste gas generated during operation.

Conclusion

Laser marking is a comprehensive processing technology involving multiple fields such as optics, mechanics, electronics, materials, and software. From blurred marking to graphic distortion, from insufficient depth to abnormal color, multiple causes may be hidden behind each problem. This article systematically reviews six major categories of common problems and their solutions, aiming to help practitioners establish systematic thinking of "phenomenon identification → cause analysis → targeted solution → preventive maintenance." In actual operation, it is recommended to develop the habit of recording parameters and test results and gradually build one's own parameter library and experience system. When encountering unfamiliar materials or difficult-to-solve faults, promptly consulting the equipment supplier's application engineer is also a wise move. Only by combining theoretical knowledge with practical experience can one truly master laser marking technology and achieve stable, efficient, and high-quality production.

Likes:

Tel
15921227578 Liu Jinlin
Landline:021-69176937
Email
jinlinliu@bmzpmw.com
Headquarters Base
No. 58, Lane 355, Shengxin South Road, Nanxiang Town, Jiading District, Shanghai
Taicang Base
About 60 meters northeast of the intersection of Taicang City Pai Xin Chang Line and Xingang Road in Suzhou City
Customer Service WeChat
Copy successful
Contact
We are right beside you
Add WeChat and let us know your needs
Tel
15921227578
Top
Copy successful

WeChat ID: 400-000-8888

Add WeChat friends to get free
solutions and quotes

OK